How Is a Compressor Overhaul Carried Out? A Step-by-Step Technical Guide

Why Is a Compressor Overhaul Necessary?
Industrial refrigeration compressors typically run 6,000–8,000 hours per year. In a compressor that reaches 30,000–50,000 operating hours, the cylinders, piston rings, valve plates and bearing surfaces wear; this increases energy consumption by 10–25% and prevents efficient cooling. A timely overhaul both prevents serious failures and allows the compressor to keep running for another 15–20 years.
Signs That an Overhaul Is Needed
- A noticeable drop in cooling capacity
- Operating pressure or temperature higher than normal
- Vibration or abnormal noise from the compressor
- Increased oil consumption or oil contamination
- Higher electricity consumption compared with the previous period
The Overhaul Process: Step by Step
1. System Isolation and Refrigerant Recovery: The compressor is taken out of service and the refrigerant is recovered with an authorised device. This step is both a legal requirement and a safety necessity.
2. Disassembly and Inspection: The compressor is fully dismantled and all internal parts are measured. Cylinder bore diameter, piston diameter and valve seating surfaces are compared against tolerance values.
3. Parts Replacement: Worn piston rings, valve plates and spring sets, bearing sets, oil seals and gaskets are replaced with new original parts.
4. Assembly and Leak Test: The compressor is reassembled and a leak test is applied under nitrogen pressure. Moisture and air are then removed from the system by vacuum.
5. Charging and Commissioning: The refrigerant charge is made; operating pressure, temperature and amperage values are compared with factory specifications and the system is commissioned.
Overhaul Cost and Return
For a medium-sized Bitzer reciprocating compressor, the overhaul cost is generally 20–35% of a new compressor. This investment pays back in 12–18 months; moreover, the system continuing to operate compatibly with its existing configuration guarantees operational continuity.
The Özsayın technical team provides overhaul services for compressors of all brands, notably Bitzer, Frascold, Bock, Carlyle, Copeland and Danfoss. Contact us for technical support.
